What is the difference between heat-shrinkable film, baling film and plastic wrap

Bale film and plastic wrap film are cast films, which are non-stretching and non-directional flat-extruded films produced by melt casting quenching.

Bale film is used as a protective film for wrapping goods. It is hard and has poor transparency. It can only provide protection for goods, but cannot improve the beauty of goods.


Product Knowledge of Food Packaging Film

Food packaging film has the characteristics of light quality, easy to use, good heat and cold resistance, and good appearance can be in direct contact with food, uncovered without residue, to ensure that the food is fresh, hygienic, and safe.

What is shrink film used for

POF shrinkable film according to the international standard carefully made small heat shrinkable packaging equipment, with simple operation, a wide range of application, good sealing, high transparency, low cost, high-grade characteristics, suitable for small and medium-sized batch products packaging.

Shrink rate of POF shrink films

POF shrink film: good transparency, good flexibility, degradable; The initial shrinkage temperature is 100-150℃, the shrinkage ratio is greater than 50% in both vertical and horizontal directions, the thickness is 0.012-0.04, and it is not suitable for packing heavy objects and long-term storage.

Why do POF shrink films need to be punched

Customers who use POF shrinkable film for the first time feel confused when they ask if they should have a hole punched in the film, and don't know whether to do it or not. Now I'm going to talk a little bit about perforating the POF shrinkable film.


The difference between POF shrinkable film and PVC shrinkable film

POF heat shrinkable film is a new type of heat-shrinkable film material, which is made of linear low-density polyethylene as the middle layer (LLDPE), copolypropylene (PP) as the inner and outer layer, through three extruders, and then through die head forming, film bubble-blowing and other special processes. POF is environmentally friendly, high transparency, high shrinkage, good heat-sealing performance, high gloss, strong toughness, tear resistance, heat shrinkage uniform packaging film, suitable for automatic high-speed packaging, is the traditional packaging replacement products, widely used in audio and video products, tobacco, non-staple food, gifts, washing products and so on.

what is Polyethylene shrink film's Strengths?

Beneficial for wrapping multi-packs of heavy items—for example, an outsized count of beverages or water bottles. it's highly durable and is in a position to stretch quite other films. like polyolefin, polyethylene is FDA approved for food contact.

Drawbacks of Polyethylene Shrink Film

Polyethylene Shrink Film- Polyethylene shrink film is employed for packaging heavier products. Polyethylene shrink film (bundling film) is most frequently extruded onto the single wound or flat rolls. The rolls are used on shrink bundling machines that have a sealing bar and shrink tunnel.

What does POF mean


POF is an abbreviation for polyolefin and generally refers to heat shrinkable shrink film.


Various machines are used POF shrink film, from simple heat guns to conveyor-driven heat shrink tunnels. The product, volumes, and purpose dictate the appropriate solution.

How to use PE shrinkable bag

POF shrink bags are not suitable for heating in a microwave oven. Some colored plastic packaging especially cannot be placed in a microwave oven. After being added, these colors may fall off and release toxic substances, causing greater harm to the human body. Even the completely colorless POF heat-shrinkable bag is not suitable for microwave ovens, because plastic products are very likely to melt and release toxic substances that are more toxic and harmful. Food in POF heat shrinkable bags should not be kept cold in the refrigerator. Ordinary plastic packaging cannot achieve the preservation effect because it is not air-permeable. It will also cause bacteria to grow and endanger human health.

Carpet chair mats

48" x 36" clear office floor mats, computer and desk chair mats

Chair cushion for hard floors only: Not suitable for any carpet. Protects hard floor surfaces from scuffs and abrasions as you rotate and slide easily. In addition, it prevents dirt, stains, and spills, reduces floor wear and tear, and avoids costly repairs to hardwood or laminate floors. Avoiding rough friction between the chair and the floor also helps chair casters.

Why shrinkage area temperature should be equalized

PE heat shrink film is an excellent material to replace PVC shrink film. As PVC contains low toxicity, and generally do not advocate the application of food packaging, PE is non-toxic, odorless, and can be applied to both industrial and food packaging. 

Why shrink film sealing is not firm

POF Heat shrink film is mainly used in the bundling and packaging of bottles, comparing the whole bundle of beer and pure water. With the progress of industrialization, the consumption of pure water is also increasing, and their development provides more opportunities for the application of heat shrink film.


The difference between the three types of shrink film

Shrink film is used in the sales and transportation process of various products, the main role is to stabilize, cover and protect the items, shrink film is commonly used in outdoor, need to add anti-UV agent, so there are many types, there are PE shrink film, PVC shrink film, POF shrink film, etc., today and manufacturers together to see the difference between them

How to test the heat treatment of POF shrink film

POF shrink film is widely used in industry and life, POF shrink film in food or other items can play its function of packaging, today we will introduce the method of detecting the heat treatment of POF shrink film

Production process of POF shrink film

 POF shrink film is linear low-density polyethylene and copolymer polypropylene as the main raw material, the processing, and the product application process does not produce odor, product hygiene performance in line with standards can be used for packaging food. These necessary raw materials to add the necessary additives, processed by co-extrusion blow molding process, the process is different from the traditional blow molding process, due to the poor tensile properties of PP melt state, and therefore can not use the traditional blow molding process, and the use of double film bubble process, it is the raw materials by different extruders melt extrusion, through the design of the co-extrusion die, the formation of the initial film after quenching, and then after heating the second blow stretching process to make POF shrink film. 

Why the IEC value of cross-linked film decreases

The cross-linked film is a good substitute for PE film, which has a wide space and is in line with the company's future direction of positioning high-end films. Previously, the market expected that the expansion of the product is difficult, we believe that based on the role of packaging machinery, cost-effective and demonstration effect of the three factors, the development of downstream will be accelerated.

Jenny He

+86 13451782877

JennyHe

sales@hjtsourcing.com

Jenny He

+86 13451782877